+47 474 47 490 info@flexcoat.no
Flexcoat foam and polystyene coatings are 1:1, fast-set, spray applied two-component polyureas, polyurethanes and hybrids. offering excellent impact resistance, UK certified class 1 fire retardancy, and different gel times, our products are the first choice for theme parks, TV, film, exhibitons and artistic sculptures. Rapid curing allows for instant or immediate handling of products, making it a much improved alternative to GRP, whilst also cutting down time and removing harmful VOC's.

Coating Characteristics

  • Protects hot wire cut foam
  • Encapsulation coating is an impervious barrier to foam
  • Hard coats will not dissolve foam
  • Formulations available for hot and cold climates
  • Smooth and textured finishes available
  • Easily sandable
  • Excellent impact resistant
  • Optimised balance of impact resistance, hardness and flexibility
  • Coatings contour to the surface and can be built to any desired film thickness
  • Smooth glossy finish without orange-peel effect
  • Resists drips & sags
  • Elastoline 7065.05 is a 5 second gel time, 1:1, fast-set, spray applied two-component pure polyurea hardcoat. The quick gel time make this an ideal coating for complex items as it reduces drips an runs. It is 100% solids and contains zero VOCs. Due to its excellent impact resistance, Elastoline 7065.05 is the industry leading protective hardcoat for EPS foam structures. Elastoline 7065 also exhibits excellent abrasion resistance, and serves as an abrasion resistant coating over steel. TENSILE STRENGTH
    ELONGATION
    HARDNESS SHORE D
    GEL TIME, SECONDS
    18 N/mm2
    600%
    >50
    5
    Elastoline 7065.10 is a 10 second gel time, 1:1, fast-set, spray applied two-component pure polyurea hardcoat. The medium gel time make this an ideal coating for items where overspray needs to be minimised as it "wets out" more than the 5 second version. It is 100% solids and contains zero VOCs. Due to its excellent impact resistance, Elastoline 7065.10 is the industry leading protective hardcoat for EPS foam structures. TENSILE STRENGTH
    ELONGATION
    HARDNESS SHORE D
    GEL TIME, SECONDS
    18 N/mm2
    600%
    >50
    10
    Elastoline 7065.15 is a 15 second gel time, 1:1, fast-set, spray applied two-component pure polyurea hardcoat. The long gel time makes this an ideal coating for artistic prjects where a smooth and glossy finish is required. It is 100% solids and contains zero VOCs. Due to its excellent impact resistance, Elastoline 7065.15 is the industry leading protective hardcoat for EPS foam structures. TENSILE STRENGTH
    ELONGATION
    HARDNESS SHORE D
    GEL TIME, SECONDS
    18 N/mm2
    600%
    >50
    15
    Elastoline 7061.05 ia a certified UK Class 1 fire retardant (BS476 part 7), 5 second gel time, 1:1, fast-set, spray applied two-component pure polyurea hardcoat. The quick gel time make this an ideal coating for complex items as it reduces drips an runs. It is 100% solids and contains zero VOCs. Due to its excellent impact resistance, Elastoline 7061.05 is the industry leading protective hardcoat for EPS foam structures. Elastoline 7061.05 also exhibits excellent abrasion resistance, and serves as an abrasion resistant coating over steel. TENSILE STRENGTH
    ELONGATION
    HARDNESS SHORE D
    GEL TIME, SECONDS
    18 N/mm2
    600%
    >50
    5
    Elastoline 7061.10 is a certified UK class 1 fire retardant (BS476 part 7), 10 second gel time, 1:1, fast-set, spray applied two-component pure polyurea hardcoat. The medium gel time make this an ideal coating for items where overspray needs to be minimised as it "wets out" more than the 5 second version. It is 100% solids and contains zero VOCs. Due to its excellent impact resistance, Elastoline 7061.10 is the industry leading protective hardcoat for EPS foam structures. TENSILE STRENGTH
    ELONGATION
    HARDNESS SHORE D
    GEL TIME, SECONDS
    18 N/mm2
    600%
    >50
    10
    Elastoline 7061.15 is a certified UK class 1 fire retardant (BS476 part 7), 15 second gel time, 1:1, fast-set, spray applied two-component pure polyurea hardcoat. The long gel time makes this an ideal coating for artistic prjects where a smooth and glossy finish is required. It is 100% solids and contains zero VOCs. Due to its excellent impact resistance, Elastoline 7061.15 is the industry leading protective hardcoat for EPS foam structures. TENSILE STRENGTH
    ELONGATION
    HARDNESS SHORE D
    GEL TIME, SECONDS
    18 N/mm2
    600%
    >50
    15
    Elastoline 7001FR is a certified UK class 1 fired retardant (BS476 bpart 7), 45 second gel time,1:1, fast-set, spray applied two-component polyurethane coating. It is 100% solids and contains zero VOCs. Elastoline 7001FR is typically applied to EPS foam as a protective hardcoat encapsulant. It has a high hardness, excellent impact resistance and allows the applicator to achieve a smooth, glassy finish. TENSILE STRENGTH
    ELONGATION
    HARDNESS SHORE D
    GEL TIME, SECONDS
    19 N/mm2
    45%
    70
    45
    Elastoline 7001FR 10 Second Gel variant is a certified UK class 1 fired retardant (BS476 bpart 7), 10 second gel time,1:1, fast-set, spray applied two-component polyurethane coating. It is 100% solids and contains zero VOCs. Elastoline 7001.10FR is typically applied to EPS foam as a protective hardcoat encapsulant. It has a high hardness and excellent impact resistance. TENSILE STRENGTH
    ELONGATION
    HARDNESS SHORE D
    GEL TIME, SECONDS
    19 N/mm2
    45%
    70
    10
    Elastoline 7446FR is a certified UK class 1 fire retardant (BS476 part 7) 3 second gel time, 1:1, fast-set, spray applied two-component polyurethane coating. It is 100% solids and contains zero VOCs. Elastoline 7446FR is ideal for hard coating EPS as well as producing structural parts from open molds. Elastoline 7446FR has a very high hardness, excellent rigidity and impact resistance yet maintains good flexibility. This combination of properties yields a durable and structural finished item that can easily be drilled and sanded. TENSILE STRENGTH
    ELONGATION
    HARDNESS SHORE D
    GEL TIME, SECONDS
    21 N/mm2
    25%
    70
    3
    Home

    About Elastothane

    Gallery

    Application Equipment

    Contact Us

    Foam & EPS Coatings

    Metal Coatings

    Wood Coatings

    Concrete Coatings

    Linings For Moulds

    Flexcoat AS
    Strand
    N-6143 Fiskaa
    Norway



    TEL: +47 - 474 474 90
    EMAIL: info@flexcoat.no